Knox Gear Pop Filter for Broadcasting & Recording Microphones

For extra support and stability during recording, the arm can be bent around the stand and mic. Eliminating these noises makes your recorded audio sound clearer and more professional to listeners! Clamp Fits Most Microphone Stands This pop screen's clamp is designed to fit most microphone stands and boom arms.

Padding on both surfaces of the clamp protects your microphone from scratches and damage. Fully adjustable gooseneck arm - the pop screen is mounted on a flexible gooseneck arm that allows you to position it however you want, and, for extra support and stability during recording, the arm can be bent around the stand and mic.

Large surface area - the screen is 6" in diameter and will diffuse bursts of air even if the source isn't directly in front of the microphone. Cheap way to improve audio quality - pop screens diffuse wind and gusts of air expelled from your mouth when you speak to help eliminate the loud thuds that can occur when air hits the microphone.

The arm is roughly 14" long so you can position the screen as close or as far away from the mic's surface as you'd like. The clamp's curved base wraps around mic stands to hold it in place and the rubber screw pad contours to the surface of what it's in contact with. Fully adjustable gooseneck Arm The pop screen is mounted on a flexible gooseneck arm that allows you to position it however you want.

An inexpensive way to improve audio quality whether you're a professional or amateur, adding a pop screen to your recording set up is a cheap and easy way to improve the audio quality of your recordings immediately.

Knox Microphone Shock Mount for Audio-Technica ATR2100-USB and Samson Q2U

It connects to a microphone stand that has a 3/8 thread, but it also has a detachable adapter and works with a 5/8 microphone. Featuresthe shock mount features a padded clamp that secures and protects the mic with a locking knob to adjust the angle 180°. The knox gear microphone shock mount is a rugged microphone shock isolation stand mount that flexes its corded muscles to combat vibrations, and clamps on to any base or overhead stand to help you record sound that's smooth and steady.

The shock mount is compatible with any microphone between 28mm and 31mm in diameter. Secure clamp with locking knob: A padded clamp secures and protects the mic with a locking knob to adjust the angle 180°. Warranty: Includes a two year warranty. A steel frame ensures strength and long life, while flexible cables absorb vibration.

Compatibility: the shock mount is compatible with any microphone between 28mm and 31mm in diameter. It also has a detachable adapter and works with a 5/8 microphone. Absorbs vibration: The mount flexes its corded muscles to combat vibrations. Durable: a steel frame ensures strength and long life.


Similar products

On-Stage Foam Ball-Type Microphone Windscreen, Black
Samson Q2U USB/XLR Dynamic Microphone Recording and Podcasting Pack (Includes Mic Clip, Desktop Stand, Windscreen and Cables)
Samson Q2U Handheld Dynamic USB Microphone Recording and Podcasting Pack (Black)
Knox Gear Pop Filter for Broadcasting & Recording Microphones
Neewer NW(B-3) 6 inch Studio Microphone Mic Round Shape Wind Pop Filter Mask Shield with Stand Clip (Black Filter)
Audio-Technica AT2005USB Cardioid Dynamic USB/XLR Microphone
Samson Q2U Black Handheld Dynamic USB Microphone with Knox Boom Arm and Pop Filter
Samson Q2U Dynamic USB Microphone Podcasting Pack and Accessory Bundle with Boom Arm + Headphones + Pop Filter + Fibertique Cloth
On-Stage Foam Ball-Type Microphone Windscreen, Blue
On-Stage DS7200B Adjustable Desktop Microphone Stand, Black


Knox Gear Professional Microphone Studio Stand for Yeti and Snowball Microphones Compatible with all Microphones and Shock Mounts

Our desktop boom arm is fully adjustable and extendable to ideal positions so you can do what you love in a supportive environment. Two axis swivel mount that fastens right on the edge of your desk, and complete horizontal/vertical extension up to 30" or 38", full 360 rotation, you are ensured ideal versatility of how you arrange your recording setup.

The world of music, voice acting, and broadcasting is one that requires everything to be perfect. It also has a detachable adapter and works with a 5/8 microphone. Absorbs vibration: The mount flexes its corded muscles to combat vibrations. Durable: a steel frame ensures strength and long life. To achieve the ideal set up, you need the right equipment and Knox is your go-to for the best studio gear.

This desktop boom mic stand is the best option to create a perfectly smooth and comfortable setup for your broadcasting or music recording experience. This means quality equipment and a neat setup so you can comfortably position yourself in the ideal position for you work the way you want. You'll love the durable quality, ease of installation, and complete control and adjustability.

Use the knob on the side of the microphone placement to securely position your mic so it won't budge!Get yourself an arm with charm with Knox! Sleek, comfortable, and versatile to suit your room or studio! Compatibility: the shock mount is compatible with any microphone between 28mm and 31mm in diameter.

This mic stand is a must-have for home and professional studios, no matter what you are recording or broadcasting. The perfect position for your mic: achieving the perfect audio output and ideal positioning is easy with our suspension boom arm that is fully adjustable with 360° rotation and a two axis swivel mount.




Similar products

Knox Gear Blue Yeti Shock Mount - Black
Auphonix Black Shock Mount Compatible with Blue Yeti Mic
Professional Foam Windscreen for Blue Yeti - Covers Other Large Microphones, such as MXL, Audio Technica and Many More - Quality Sponge Material Makes This The Perfect Pop Filter for your Mic (Black)
Microphone Pop Filter For Blue Yeti and Any Other Microphone Dual Layered Wind Pop Screen With Flexible 360° Gooseneck Clip Stabilizing Arm By Earamble
Mic Cover Foam Microphone Windscreen for Blue Yeti, Yeti Pro Condenser Microphone (Size A, 1 Pack)
Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-53mm Microphone
Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
Pop Filter for Blue Yeti Microphone
Pop Filter,PEMOTech [Upgraded Three Layers] Metal Mesh & Foam & Etamine Layer Microphone Windscreen Cover Handheld Mic Shield Mask,Microphone Accessories for Vocal Recording,Youtube videos,Streaming
Knox Gear Pop Filter for Broadcasting & Recording Microphones


Black - Knox Gear Blue Yeti Shock Mount

Adjustable hinge this yeti mount features a fully adjustable hinge so you can quickly and easily set the microphone's position to the angle that works best for you. Heavy duty construction the knox Gear Shock Mount is made of metal and features high-tension elastic cords that isolate the Yeti mic. Solid metal material and strong rubber bands for durable and sturdy construction.

Even slight vibrations can produce disruptive noises in your recordings so it's important to use a shock mount to eliminate as much vibration and mechanical noise as possible This Knox Gear Shock Mount is designed specifically for Blue Yeti and Yeti Pro microphones and is a great choice if you're looking for a versatile shock mount that can be easily attached to most boom arms.

But the audio produced by the most expensive microphone can be rendered unusable if it's sitting on an unstable surface. Secure clamp with locking knob: A padded clamp secures and protects the mic with a locking knob to adjust the angle 180°. Warranty: Includes a two year warranty. The hinge is held in place by a thumb screw so you can set the tension as loose or as tight as you'd like, too! Compatibility: the shock mount is compatible with any microphone between 28mm and 31mm in diameter.

It also has a detachable adapter and works with a 5/8 microphone. Absorbs vibration: The mount flexes its corded muscles to combat vibrations. Durable: a steel frame ensures strength and long life.


Similar products

Mic Cover Foam Microphone Windscreen for Blue Yeti, Yeti Pro Condenser Microphone (Size A, 1 Pack)
InnoGear Upgraded Microphone Suspension Stand with 3/8" to 5/8" Screw Adapter Mic Clip Adjustable Boom Studio Scissor Arm Stand for Blue Yeti Snowball, Yeti Nano, Yeti x and other Mic
Knox Gear Professional Microphone Studio Stand for Yeti and Snowball Microphones (Compatible with all Microphones and Shock Mounts)
InnoGear Microphone Stand Sturdy Swivel Mount Studio Suspension Mic Clip Adjustable Boom Studio Scissor Arm, Spring Built-in Stand for Blue Yeti Snowball Yeti Nano and Yeti x
Professional Foam Windscreen for Blue Yeti - Covers Other Large Microphones, such as MXL, Audio Technica and Many More - Quality Sponge Material Makes This The Perfect Pop Filter for your Mic (Black)
InnoGear Microphone Stand Sturdy Swivel Mount Studio Suspension Mic Clip Adjustable Boom Studio Scissor Arm, Spring Built-in Stand for Blue Yeti Snowball Microphone and Blue Yeti Nano
Blue Compass Premium Tube-Style Broadcast Boom Arm
Pop Filter for Blue Yeti Microphone
Blue Yeti Blackout + Assassin's Creed Odyssey Bundle
NEUMA Professional Microphone Stand with Pop Filter Heavy Duty Microphone Suspension Scissor Arm Stand and Windscreen Mask Shield for Blue Yeti Snowball, Recordings, Broadcasting, Streaming, Singing


Eastshining Upgraded Adjustable Microphone Suspension Boom Scissor Arm Stand with Shock Mount Mic Clip Holder 3/8'' to 5/8'' Screw Adapter -for Blue Yeti, Snowball & Other Microphones

Secure clamp with locking knob: A padded clamp secures and protects the mic with a locking knob to adjust the angle 180°. Warranty: Includes a two year warranty. Arms are lightweight,  firmly attach the microphone anywhere. Folding type - with two 14. 5"/36. 83cm adjustable legs, you can easily adjust the mic to the suitable angle or height to show your perfect voice.

Added with soft mat or rubber washer it can avoid damaging your furniture. All zinc alloy construction - compact microphone stand is designed for heavy duty carry, the adjustable scissor arm stand is made of high quality steel frame and electrostatic powder spraying tech, sturdy, completely flexible and convenient to carry, antirust and durable.

Super-strong spring. Comfort to pull and draw, fold out of the way you exactly need it to be. Moreover, the foldable arms allow you to carry it with you easily. The base is not fixed on the glass table! ▶Microphone and Pop Filter in the pictures NOT INCLUDED. Specifications: material: premium Steel Frame & Clamp and ABS Plastic Mic Clip Arm Length: 14.

5"/36. 83cm desk Clamp: 2. 15"/5.


Similar products

Samson G-Track Pro Professional USB Condenser Microphone with Audio Interface
Blue Snowball Studio USB All-In-One Vocal Recording System with Samson Dynamic Headphones, Mic Pop Filter, and Fibertique Cloth
Samson G-Track Pro Professional USB Condenser Microphone with Samson Headphones and Hardbody Headphone Case Accessory Bundle
Razer Seiren X USB Streaming Microphone: Professional Grade - Built-In Shock Mount - Supercardiod Pick-Up Pattern - Anodized Aluminum - Matte Black
Pop Filter,PEMOTech [Upgraded Three Layers] Metal Mesh & Foam & Etamine Layer Microphone Windscreen Cover Handheld Mic Shield Mask,Microphone Accessories for Vocal Recording,Youtube videos,Streaming
Pop Filter,Aokeo [Upgraded Three Layers] Metal Mesh & Foam & Etamine Layer Microphone Windscreen Cover Handheld Mic Shield Mask,Microphone Accessories for Vocal Recording,Youtube videos,Streaming
Auphonix Black Shock Mount Compatible with Blue Yeti Mic
Microphone Pop Filter For Blue Yeti and Any Other Microphone Dual Layered Wind Pop Screen With Flexible 360° Gooseneck Clip Stabilizing Arm By Earamble
On-Stage Foam Ball-Type Microphone Windscreen, Black
Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-53mm Microphone


On-Stage Foam Ball-Type Microphone Windscreen, Black

They are not designed for use with headset microphones. The music People! Inc. With this you can easily mount it on your table without any other accessary. Compatibility: the shock mount is compatible with any microphone between 28mm and 31mm in diameter. Comes with one table mounting clamp, an adjustable positioning screw, protects microphone from shaking, can easily clip to any desktop up to 2.

15"/5. 5cm thick. Super-strong springs are adjustable and have a greater load bearing capacity More than 4. 4 pounds. When you first open the complete set microphone, perfect suit for mics with a diameter of more than 4. 5cm. The diameter of the mic clip can be changed by adjusting O-rings on shock mount, the arm will pop out like waving, Snowball.

Stability & safety - dual suspension springs on each boom arm, suddenly dropping and making noise. It doesn't dip or sink. Universal degree - the diameter of abs plastic clip mic holder is 1. 77''/4. 5cm, tv stations, battle station, voice-over asmr sound studio, etc.


Similar products

CBI MLC LowZ XLR Male to XLR Female Microphone Cable, 20 Feet
Behringer Ultravoice Xm8500 Dynamic Vocal Microphone, Cardioid
Shure SM48-LC Vocal Dynamic Microphone, Cardioid
Wireless Microphone,Fifine Handheld Dynamic Microphone Wireless mic System for Karaoke Nights and House Parties to Have Fun Over The Mixer,PA System,Speakers-K025
Knox Microphone Shock Mount for Audio-Technica ATR2100-USB and Samson Q2U
Samson Q2U USB/XLR Dynamic Microphone Recording and Podcasting Pack (Includes Mic Clip, Desktop Stand, Windscreen and Cables)
Pyle Professional Dynamic Vocal Microphone - Moving Coil Dynamic Cardioid Unidirectional Handheld Microphone with ON/OFF Switch Includes 15ft XLR Audio Cable to 1/4'' Audio Connection - PDMIC59
Shure SM58-LC Cardioid Dynamic Vocal Microphone - Black
Moukey Universal Microphone Mic Clip Holder for Mic Stand with 5/8" Male to 3/8" Female Adapter, 2-pack
TONOR UHF Wireless Microphone Handheld Mic with Bluetooth Receiver 1/4 Output for Conference/Weddings/Church/Stage/Party/Karaoke, 65ft


Mic Cover Foam Microphone Windscreen for Blue Yeti, Yeti Pro Condenser Microphone Size A, 1 Pack

Features: the mic cover is designed for the Blue Yeti and Yeti Pro Condenser microphone. Load:more than 7067oz/2KG. Suitable for any stores, table, restaurants, desk, radio broadcasting, with the brass screw adapter, the effect will be better. Protect your mics against wind interference and singers' spit. When you first open the complete set microphone, perfect suit for mics with a diameter of more than 4.

5cm. Solid metal material and strong rubber bands for durable and sturdy construction. Improves the recording quality by reducing unwanted noises and wind interference. It doesn't dip or sink. Universal degree - the diameter of abs plastic clip mic holder is 1. 77''/4. 5cm, voice-over asmr sound studio, TV stations, battle station, etc.

Cooperate with the pop filternot included, stage and family performance, Youtube/Facebook Video recording, the mic stand can attach your Blue Snowball & Blue Yeti and fits most of the microphones on the market. Specifications: color: black material: foam Package includes: 1 x Foam mic cover Compatibility: the shock mount is compatible with any microphone between 28mm and 31mm in diameter.

Arms are lightweight,  firmly attach the microphone anywhere. Folding type - with two 14.


Similar products

Blue Yeti Blackout + Assassin's Creed Odyssey Bundle
InnoGear Upgraded Microphone Suspension Stand with 3/8" to 5/8" Screw Adapter Mic Clip Adjustable Boom Studio Scissor Arm Stand for Blue Yeti Snowball, Yeti Nano, Yeti x and other Mic
Pop Filter for Blue Yeti Microphone
Blue Yeti Nano Premium USB Mic for Recording and Streaming-Blackout, (988-000400)
Knox Gear Blue Yeti Shock Mount - Black
khanka Carrying Bag for Blue Yeti USB Microphone
BLUE Microphone Cable, Whiteout, Mic Only (988-000104)
BLUE Condenser Microphone, Aztec Copper, Mic Only (988-000077)
Blue Yeti X Professional Condenser USB Microphone (988-000105)
Case for Blue Yeti USB Microphone/Yeti Pro, Also Fit Cable and Other Accessories, by COMECASE


Blue Compass Premium Tube-Style Broadcast Boom Arm

Application: protect your Blue Yeti microphone from dust and saliva, good for indoor and outdoor use. Hidden channel Cable management. Load:more than 7067oz/2KG. It also has a detachable adapter and works with a 5/8 microphone. Absorbs vibration: The mount flexes its corded muscles to combat vibrations. Durable: a steel frame ensures strength and long life.

It doesn't dip or sink. Universal degree - the diameter of abs plastic clip mic holder is 1. 77''/4. 5cm, battle station, TV stations, voice-over asmr sound studio, etc. Cooperate with the pop filternot included, youtube/Facebook Video recording, stage and family performance, the mic stand can attach your Blue Snowball & Blue Yeti and fits most of the microphones on the market.

Solid metal material and strong rubber bands for durable and sturdy construction. Function: the foam cover is made of high density foam, it helps improve recording quality by reducing unwanted noises and wind interference. With smooth, quiet operation and sophisticated on-camera looks, Compass is the perfect boom arm for mics weighing up to 2.

4 pounds, including the Blue Yeti and Blackout Spark SL. Compass is a premium tube-style desktop boom arm with internal springs and built-in cable management, voice-over, podcasting, ideal for broadcast applications like game streaming, and more. Super-strong springs are adjustable and have a greater load bearing capacity More than 4.




Similar products

Blue Radius III Custom Shockmount for Yeti and Yeti Pro USB Microphones
Blue Radius III Custom Shockmount for Yeti and Yeti Pro USB Microphones (Renewed)
Blue The Pop Universal Pop Filter
Auphonix Black Shock Mount Compatible with Blue Yeti Mic
Blue Yeti X Professional Condenser USB Microphone (988-000105)
Professional Foam Windscreen for Blue Yeti - Covers Other Large Microphones, such as MXL, Audio Technica and Many More - Quality Sponge Material Makes This The Perfect Pop Filter for your Mic (Black)
Knox Gear Blue Yeti Shock Mount - Black
GoXLR Mini - Mixer & USB Audio Interface for Streamers, Gamers & Podcasters
Mic Cover Foam Microphone Windscreen for Blue Yeti, Yeti Pro Condenser Microphone (Size A, 1 Pack)
Pop Filter for Blue Yeti Microphone


Knox Microphone Suspension Boom Scissor Arm w Yeti Mic Shock Mount - Black

Colorful foam windscreens fit most mics. Arm bends back and forth at the base, the stand can be extended up to 27. 6"/70cm. Good choice for musical instruments, interviews, podcasting, field recordings, voice-covers, conference calls. Attention: the foam microphone covers was squeezed in a bag, so please put it out for a little time then it will return to its original shape.

Designed for normal sized handheld mics similar in design to a Shure SM58. Secure clamp with locking knob: A padded clamp secures and protects the mic with a locking knob to adjust the angle 180°. Warranty: Includes a two year warranty. The most important item involved in the recording process is definitely a good microphone.

Comes with one table mounting clamp, protects microphone from shaking, an adjustable positioning screw, can easily clip to any desktop up to 2.15"/5. 5cm thick. It doesn't dip or sink. Universal degree - the diameter of abs plastic clip mic holder is 1. 77''/4. 5cm, battle station, voice-over asmr sound studio, TV stations, etc.

Cooperate with the pop filternot included, stage and family performance, Youtube/Facebook Video recording, the mic stand can attach your Blue Snowball & Blue Yeti and fits most of the microphones on the market.


Similar products

Professional Foam Windscreen for Blue Yeti - Covers Other Large Microphones, such as MXL, Audio Technica and Many More - Quality Sponge Material Makes This The Perfect Pop Filter for your Mic (Black)
Pop Filter for Blue Yeti Microphone
Mic Cover Foam Microphone Windscreen for Blue Yeti, Yeti Pro Condenser Microphone (Size A, 1 Pack)
Knox Pop Filter for Yeti Microphone
Microphone Pop Filter For Blue Yeti and Any Other Microphone Dual Layered Wind Pop Screen With Flexible 360° Gooseneck Clip Stabilizing Arm By Earamble
2 Pack Professional Microphone Furry Windscreen Muff Wind Cover with Foam Microphone Windscreen for Blue Yeti
Foam Microphone Windscreen - YOUSHARES Mic Cover Pop Filter for Blue Yeti, Yeti Pro Condenser Microphones (Black)
Blue Microphones Yeti USB Microphone (Teal)
Caseling Hard Case Fits the Blue Yeti USB Microphone or Yeti Pro
Blue Microphones Yeti PRO XLR & USB Condenser Microphone Bundle with Blucoil Pop Filter Windscreen, 10-FT Balanced XLR Cable, and 5-Pack of Reusable Cable Ties


On Stage MY-420 Studio Microphone Shock Mount

Secure clamp with locking knob: A padded clamp secures and protects the mic with a locking knob to adjust the angle 180°. Warranty: Includes a two year warranty. Shock mount fits pencil mics 19-30mm in diameter. Angle adjustments will lock into place. The perfect position for your mic: achieving the perfect audio output and ideal positioning is easy with our suspension boom arm that is fully adjustable with 360° rotation and a two axis swivel mount.

Universal compatibility: our boom arm supports up to 5 pounds using a 5/8th" copper thread making it compatible with just about every microphone, so you can use your favorite studio mic anytime. Durable construction: using high grade steel tubing allows everlasting strength that will provide you with years of usage! Great durability ensures that your arm won't bend, break or crack easily.

Fully adjustable & extendable: the 30" scissor arms are vertically and horizontally extendable in all directions so you can place the boom arm near, far, or anywhere with supreme ease & comfort. Money back guarantee: purchase worry free with a one year manufacturer's warrantee. Compatible with all standard shock mounts.

Reduces or eliminates vibrations and mechanical noise that can ruin audio recordings. When you first open the complete set microphone, perfect suit for mics with a diameter of more than 4. 5cm.


Similar products

On-Stage Foam Ball-Type Microphone Windscreen, Black
CISNO Studio Condenser Mic Microphone Shock Mount With Metal Wind Screen Pop Filter Combo Mask Shield For Recording
On-Stage Foam Ball-Type Microphone Windscreen, Blue
Samson Q2U USB/XLR Dynamic Microphone Recording and Podcasting Pack (Includes Mic Clip, Desktop Stand, Windscreen and Cables)
Mudder 5 Pack Foam Mic Cover Handheld Microphone Windscreen (5 Pack)
Audio-Technica AT2005USB Cardioid Dynamic USB/XLR Microphone
Neewer NW(B-3) 6 inch Studio Microphone Mic Round Shape Wind Pop Filter Mask Shield with Stand Clip (Black Filter)
Audio-Technica ATR2500-USB Cardioid Condenser USB Microphone
Heil Sound PL-2T Overhead Broadcast Boom
Dragonpad USA 6" Microphone Studio Pop Filter with Clamp - Pink/Black


Knox Gear Studio Boom Microphone Arm Stand For Yeti and Snowball Microphones

Reduces or eliminates vibrations and mechanical noise that can ruin audio recordings. Microphone in the pictures NOT INCLUDED. Comes with one table mounting clamp, protects microphone from shaking, an adjustable positioning screw, can easily clip to any desktop up to 2.15"/5. 5cm thick. It also has a detachable adapter and works with a 5/8 microphone.

Absorbs vibration: The mount flexes its corded muscles to combat vibrations. Durable: a steel frame ensures strength and long life. Of weight | arm extends 14" horizontally and Vertically | The Arm Provides a Total Reach of 27. 5". Isolates microphone from physical vibration, floor, and stand noise. Premium all-Tube, internal spring design.

When you first open the complete set microphone, perfect suit for mics with a diameter of more than 4. 5cm. Load:more than 7067oz/2KG. Arms are lightweight,  firmly attach the microphone anywhere. Folding type - with two 14.


Similar products

Knox Gear Blue Yeti Shock Mount - Black
Microphone Pop Filter For Blue Yeti and Any Other Microphone Dual Layered Wind Pop Screen With Flexible 360° Gooseneck Clip Stabilizing Arm By Earamble
Professional Foam Windscreen for Blue Yeti - Covers Other Large Microphones, such as MXL, Audio Technica and Many More - Quality Sponge Material Makes This The Perfect Pop Filter for your Mic (Black)
Knox Pop Filter for Yeti Microphone
Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
Auphonix Black Shock Mount Compatible with Blue Yeti Mic
Mic Cover Foam Microphone Windscreen for Blue Yeti, Yeti Pro Condenser Microphone (Size A, 1 Pack)
Neewer NW(B-3) 6 inch Studio Microphone Mic Round Shape Wind Pop Filter Mask Shield with Stand Clip (Black Filter)
Blue Yeti USB Microphone-Satin Red, (988-000097)
YOUSHARES Blue Snowball Pop Filter - Customizing Microphone Windscreen Foam Cover for Improve Blue Snowball iCE Mic Audio Quality (Black)