UGREEN Mini USB Cable USB 2.0 Type A to Mini B Cable Data Charging Cord for GoPro Hero 3+, Hero HD, PS3 Controller, Cell Phones, MP3 Players, Dash Cam, Digital Camera, SatNav, GPS Receiver, PDAs 3ft

#ad
UGREEN GROUP LIMITED 10355 #ad - Devices like mobile phones, tablets, MP3 players, digital cameras and digital camcorders often have Mini Type-B ports. Description This Ugreen USB 2. 0 type a male to mini 5-pin cable features a standard Type-A USB connector on one end and a Mini Type-B connector on the other. Fully compatible with PC and Mac 4.

. Supports Plug and Play 5. Corrosion-resistant bare copper conductors, gold plated connector and foil & braid shielding provide maximum conductivity and minimize data lossPackage Contents Ugreen USB 2. 0 mini 5pin usb cable x 1pcs ugreen mini usb cable connects your usb-ready computer or uSB hub to a digital camera or other portable device with a mini B 5-pin connector, PDAs, such as an MP3 player, game controller.

UGREEN Mini USB Cable USB 2.0 Type A to Mini B Cable Data Charging Cord for GoPro Hero 3+, Hero HD, PS3 Controller, Cell Phones, MP3 Players, Dash Cam, Digital Camera, SatNav, GPS Receiver, PDAs 3ft #ad - Wide compatibility: mini usb 2. 0 cable is compatible for gopro hero hd, astro a40/50, hero 3+, garmin gps receiver, Zoom Mic, MP3 players, ps3 controller, Digital Cameras like Canon, Sat Navigation, HTC, Dash Cam etc and other devices with Mini 5 Pin connector. Super speed: supports high speed usb 2. 0 devices, data transfer speed at up to 480 Mbps, and the mini usb to usb cable is backwards compliant with full-speed USB 1.

1 12 mbps and low-speed USB 1. 0 1. 5 mbps.

More information about UGREEN GROUP LIMITED 10355 #ad

Sparkfun Pocket AVR Programmer

#ad
Sparkfun LYSB01BHHH714-ELECTRNCS #ad - Note: this product is a collaboration with Limor Fried. A portion of each sales goes back to them for product support and continued development. This board is buffered and power protected so that you can do some really evil things to the programmer without killing it. Programmer can power target. It is fast! one of the greatest features of this board is the ability to power the target up to 500mA from the programmer.

Both 10-pin and 6-pin targets supported cable included. The microcontroller-to-be-programmed can be any AVR with 64K or less of flash. Standard aVR ISP programmer. Buffered output PTC fuse protected power. This programmer works really well for atmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE.

Sparkfun Pocket AVR Programmer #ad - Attiny2313 with USBtiny firmware preloaded. This is a simple to use USB AVR programmer. The atmega328 on an arduino uno or redBoard works perfectly, but the ATmega2560 of an Arduino Mega does not. Supports atmega168/328 and many others. This new version uses an SMD 5x2 header. Based on dick streefland's USBtiny and Limor Fried's USBtinyISP.

More information about Sparkfun LYSB01BHHH714-ELECTRNCS #ad


Similar products



Pyramex SB1810S Venture II - Black Frame with Clear Lens Safety Glasses

#ad
Pyramex SB1810S #ad - 9. 75 base curved lens provides full side protection without distracting seams or traditional type side shields. Attiny2313 with USBtiny firmware preloaded. Lenses are coated for superior scratch resistance. Lenses provide 99% protection against harmful UV rays. Supports atmega168/328 and many others. Buffered output PTC fuse protected power.

Both 10-pin and 6-pin targets supported cable included. Nose buds secure the glass and prevent slipping while providing a pillow soft fit. Lenses filter 99% of harmful uv rays. Fully adjustable temples - 4 size settings. Exceeds anSI Z87. 1-2003 requirements. 9. 75 curved lenses provide more than 180 degrees of coverage without the distraction of seams.

Pyramex SB1810S Venture II - Black Frame with Clear Lens Safety Glasses #ad - The almost frameless design creates a spectacle that weighs only 27g. Nose buds secrure the glass and prevent slipping with a pillow-soft fit. Programmer can power target. Standard aVR ISP programmer.

More information about Pyramex SB1810S #ad


Similar products



ELEGOO UNO Project Basic Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

#ad
ELEGOO EL-KIT-004 #ad - Buffered output PTC fuse protected power. Lenses filter 99% of harmful uv rays. Both 10-pin and 6-pin targets supported cable included. The economical and most basic electronic components kit for arduino projects component listing: 1pcs uno r3 controller board 1pcs usb cable 1pcs breadboard 1pcs 65 jumper wire 1pcs ic 74hc595 1pcs active buzzer 1pcs tilt switch 1pcs photoresist or 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button small 10pcs Resistor 10R 10pcs Resistor 100R 10pcs Resistor 220R 10pcs Resistor 330R 10pcs Resistor 1K 10pcs Resistor 2K 10pcs Resistor 5K1 10pcs Resistor 10K 10pcs Resistor 100K 10pcs Resistor 1M 5pcs Female-to-male DuPont Wire Standard aVR ISP programmer.

Free pdf tutorial including project introduction and code will be provided, you can save a lot of time searching them. With the newest uno r3 development board + USB Cable and all the basic components. Nice package in the box with clear listing and CD. 100% compatible with arduino uno r3, MEGA 2560 R3, nanO, Arduino kit.

ELEGOO UNO Project Basic Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE #ad - Established in 2011, elegoo is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own quality management team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true.

Exceeds anSI Z87. 1-2003 requirements.

More information about ELEGOO EL-KIT-004 #ad


Similar products



Amprobe AM-510 Commercial/Residential Multimeter with Non-Contact Voltage Detection

#ad
Amprobe AM-510 #ad - Exceeds anSI Z87. 1-2003 requirements. 9. 75 curved lenses provide more than 180 degrees of coverage without the distraction of seams. The almost frameless design creates a spectacle that weighs only 27g. Nose buds secrure the glass and prevent slipping with a pillow-soft fit. The cheapest and most basic electronic components kit for Arduino beginner.

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Large backlit LCD display with data hold and relative zero mode. Both 10-pin and 6-pin targets supported cable included.

Amprobe AM-510 Commercial/Residential Multimeter with Non-Contact Voltage Detection #ad - Attiny2313 with USBtiny firmware preloaded. Standard aVR ISP programmer. All amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust. Supports atmega168/328 and many others. Free pdf tutorial including project introduction and code will be provided, you can save a lot of time searching them.

With the newest uno r3 development board + USB Cable and all the basic components. Nice package in the box with clear listing and CD.

More information about Amprobe AM-510 #ad


Similar products



UGREEN Mini USB Type C Cable, USB C to Mini USB Cable for Digital Camera, MP3 Player and More Mini B USB Devices Black

#ad
Ugreen Group Limited 50445 #ad - Package content 1x ugreen usb c to mini usb cable for digital camera, MP3 Player and More Mini B USB Device 3 FT Standard aVR ISP programmer. Supports atmega168/328 and many others. Connecting gps to laptop for navigating Connecting a GPS to a laptop is essential for both registering your device and installing the latest software and maps.

Free pdf tutorial including project introduction and code will be provided, you can save a lot of time searching them. With the newest uno r3 development board + USB Cable and all the basic components. Nice package in the box with clear listing and CD. 100% compatible with arduino uno r3, nanO, MEGA 2560 R3, Arduino kit.

UGREEN Mini USB Type C Cable, USB C to Mini USB Cable for Digital Camera, MP3 Player and More Mini B USB Devices Black #ad - Measures voltage up to 600v ac/dc, frequency, capacitance, duty cycle, AC/DC current and resistance, battery test. Full-featured with non-contact voltage detection, audible continuity and diode test. Safety rated: cat III 600V. Connecting hd to laptop for file view preferred option to connect your old mini usb equipped external HD to laptop, and gain a fast access to your hard drive via this little cable; easy to read or transfer HD files with a speed of 480MbpsMax.

Mini usb c cable specification * connector 1: usb type c male; connector 2: mini usb b male * high speed data transfer rate at up to 480 mbps * support plug and play * cable length: 3ft usb type-c compatible devicesincomplete list macbook 2015 macbook pro 2016 chromebook pixel asuS Zen AiO ThinkPad New S2 ThinkPad T570 Alienware 17 Lenovo YOGA 900 HUAWEI MateBook HP Pavilion x2 HP Spectre x2 Mini USB Compatible DevicesIncomplete List GoPro HERO HD, HERO 3+; Canon Digital Cameras; MP3 player; Garmin GPS; PS3; Note This is USB C to Mini USB cable, NOT Micro B cable, please check devices' interface before purchasing.

The cable can't transfer files from digital camera to phone.

More information about Ugreen Group Limited 50445 #ad


Similar products



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
ELEGOO EL-CB-005 #ad - Lenses filter 99% of harmful uv rays. Supports atmega168/328 and many others. It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It's got a pin layout that works well with the Mini or the Basic Stamp TX, ATN, RX, GND on one top, power and ground on the other.

The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. The power source is automatically selected to the highest voltage source. Exceeds anSI Z87. 1-2003 requirements. 9. 75 curved lenses provide more than 180 degrees of coverage without the distraction of seams.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable #ad - The almost frameless design creates a spectacle that weighs only 27g. Nose buds secrure the glass and prevent slipping with a pillow-soft fit. The cheapest and most basic electronic components kit for Arduino beginner. Both 10-pin and 6-pin targets supported cable included. Free pdf tutorial including project introduction and code will be provided, you can save a lot of time searching them.

With the newest uno r3 development board + USB Cable and all the basic components.

More information about ELEGOO EL-CB-005 #ad


Similar products



Micro USB to Mini USB 2.0 Adapter, 2-Pack Micro USB Female to Mini USB 2.0 Male Convert Connector Support Charge & Data Sync Compatible PS3 Controller, MP3 Player, Dash Cam, Digital Camera, Hero 3+

#ad
JXMOX #ad - It's got a pin layout that works well with the Mini or the Basic Stamp TX, ATN, GND on one top, RX, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. Charge and data sync for mini USB device by connecting with the Standard Micro USB Cable.

Use the driver from above link. It is a smallest, complete, and breadboard friendly board. Programmer can power target. Quick and simple: charge and data sync for Mini USB device by connecting with the Standard Micro USB Cable. Universal compatibility : mini usb 2. 0 adapter is compatible for gopro hero hd, hero 3+, zoom mic, astro a40/50, garmin GPS Receiver, Sat Navigation, Digital Cameras like Canon, mp3 player, PS3 controller, Dash Cam etc and other devices with Mini 5 Pin connector.

Micro USB to Mini USB 2.0 Adapter, 2-Pack Micro USB Female to Mini USB 2.0 Male Convert Connector Support Charge & Data Sync Compatible PS3 Controller, MP3 Player, Dash Cam, Digital Camera, Hero 3+ #ad - 18-month warranty : any question, do contact our customer support team, we will response within 24 hours by email. Supports up to 2. 4a of power, built with 56KΩ pull-up resistor for safer and more reliable quality. Attiny2313 with USBtiny firmware preloaded. Standard aVR ISP programmer. Mini b usb port is widely used for game controller and digital cameras like Canon.

More information about JXMOX #ad


Similar products



Creality 3D Printer Upgrade kit with Capricorn Premium XS Bowden Tubing, Metal Feeder Extruder Frame and Die Spring for Ender 3,Ender 3 Pro,Ender 5,CR-10/CCR-10S,S4,S5

#ad
Creality 3D #ad - Programmer can power target. The nano is using the chips atmega328p and cH340, not FT232 as official Arduino, so pls. Large backlit LCD display with data hold and relative zero mode. Cable Length: 3ft. This usb c to usb mini cable 3ft is backed with 24 months warranty and lifetime customer service support. You could download the driver of Elegoo Nano V3.

0 at: http://bit. Ly/2jklJMO. Specification: capricorn Premium XS bowden Tubing ID: 1. 95mm ± 005mm od: 4. 0mm die spring: loading grade: light Load Material: Metal Size:hole diameterOD: 031"/ 8mm; rod diameterID: 016"/ 4mm; length: 098"/ 25mm package included: 1 x1m capricorn premium xs bowden Tubing 1 x MK8 extruder drive feed kit 4 Pcs Die springs Standard aVR ISP programmer.

Creality 3D Printer Upgrade kit with Capricorn Premium XS Bowden Tubing, Metal Feeder Extruder Frame and Die Spring for Ender 3,Ender 3 Pro,Ender 5,CR-10/CCR-10S,S4,S5 #ad - Charge and data sync for mini USB device by connecting with the Standard Micro USB Cable. Suitable for 1. 75mm filament. Both 10-pin and 6-pin targets supported cable included. Customer service - if you have any problem or question for our product, please feel free to contact us.

More information about Creality 3D #ad


Similar products



ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

#ad
ELEGOO EL-KIT-003 #ad - Exceeds anSI Z87. 1-2003 requirements. 9. 75 curved lenses provide more than 180 degrees of coverage without the distraction of seams. The almost frameless design creates a spectacle that weighs only 27g. Nose buds secrure the glass and prevent slipping with a pillow-soft fit. The cheapest and most basic electronic components kit for Arduino beginner.

Attiny2313 with USBtiny firmware preloaded. Durable, rubber overmolded enclosure. High quality kite with uno r3. Charge and data sync for mini USB device by connecting with the Standard Micro USB Cable. We will do what we can do to help. Both 10-pin and 6-pin targets supported cable included. Customer service - if you have any problem or question for our product, please feel free to contact us.

ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE #ad - The power source is automatically selected to the highest voltage source. Mini usb 2. 0 adapter : high quality aluminum body, it is a minimalist solution. Ugreen usb c to mini usb cable enables you to connect a laptop such as macbook or google chromebook Pixel to a GoPro HERO HD, HERO 3+, Canon Digital Cameras, Garmin GPS, MP3 player, PS3 or other Mini USB B devices for syncing and charging.

Compatible with type c laptop and pc like macbook 2015/2016, 2016 macbook pro, Chromebook Pixel, lenovo yoga 900, Dell XPS 132016, iMac Pro, etc.

More information about ELEGOO EL-KIT-003 #ad


Similar products



GoPro Rechargeable Battery for HERO3 and HERO3+ GoPro Official Accessory

#ad
GoPro Camera AHDBT-302 #ad - It's got a pin layout that works well with the Mini or the Basic Stamp TX, RX, ATN, GND on one top, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. Quick and simple: charge and data sync for Mini USB device by connecting with the Standard Micro USB Cable.

Universal compatibility : mini usb 2. 0 adapter is compatible for gopro hero hd, zoom mic, digital cameras like canon, PS3 controller, Sat Navigation, astro A40/50, Hero 3+, mp3 player, Garmin GPS Receiver, Dash Cam etc and other devices with Mini 5 Pin connector.18-month warranty : any question, do contact our customer support team, we will response within 24 hours by email.

GoPro Rechargeable Battery for HERO3 and HERO3+ GoPro Official Accessory #ad - Use the driver from above link. It is a smallest, complete, and breadboard friendly board. Exceeds anSI Z87. 1-2003 requirements. 9. 75 curved lenses provide more than 180 degrees of coverage without the distraction of seams. The almost frameless design creates a spectacle that weighs only 27g. Nose buds secrure the glass and prevent slipping with a pillow-soft fit.

More information about GoPro Camera AHDBT-302 #ad


Similar products