Deity S-Mic 2S Shotgun Microphone, Ultra Low Off-Axis Coloration, Low Inherent Self-Noise, Weather Resistant, RF-Interference Proof, 24V/48V Phantom Powering, Super Cardioid Pickup Pattern, Only 3oz

#ad
Deity S-Mic 2S + PERGEAR #ad - Tech spec: sound field: mono transducer: condenser polar pattern:super cardioid frequency Range:50 Hz to 20 kHz Equivalent Noise Level:15 dB A-Weighted Maximum SPL:130 dB SPL THD:.

More information about Deity S-Mic 2S + PERGEAR #ad

SMALLRIG Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Moniter, Pack of 2-2060

#ad
SMALLRIG 4332041552 #ad - The arrowheads on the cold shoe show the direction to mount additional accessories. Such as cage for sony a6500 a6300 a6500, such as cage, cage for panasonic gh5 gh4 gh3, cold shoe block, etc. The counter bore hole in the center is attachable to a 1/4'' screw, but the 1/4'' screw will not touch the hot shoe contact of accessories mounted on the cold shoe.

There comes with two secure bending bevels on the one end to prevent accidental removal. Compatibility:any shoe style accessoriesPackageIncludes:2 x Cold Shoe 12412 x 1/4"-20 Screw4 x 2. 5 screw4 x hex spannerproduct dimensions: 25x25x9mmnet weight: 26gpackage size: 110x130x40mmPackage Weight:60gMaterials: Aluminum Alloy Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2.

SMALLRIG Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Moniter, Pack of 2-2060 #ad - 5 threaded holes, handle and plate etc.

More information about SMALLRIG 4332041552 #ad


Similar products



Movo BWS1000 Blimp Microphone Windshield Mount and Vibration Protection System for Shotgun Microphones - Has 12-point Internal Shock Mount, Integrated XLR Cable, Deadcat Windscreen and Grip Handle

#ad
Movo #ad - Why it's so good: the movo bws1000 features a state of the art blimp capsule, and an Internal XLR Cable - the Essential Tool for Film, Video, a 12-point Shockmount, ENG, and Field Production. Specifications compatible microphone size: 19-22mm diameter x up to 15" 38cm Length Internal Spacing: 125mm Diameter x 325mm Length Dimensions LxHxW: 19 x 5.

1 x 7. 5" 48 x 13 x 19cm Weight: 1. 65 lbs 750g smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, handle and plate etc. It allows them to capture quality audio on the fly while never missing a beat. Easy handling: has a rubberized grip handle and features 1/4" & 3/8" threads for boom pole or tripod attachment, perfect for run & gun audio capturing.

The bws1000 also includes a "deadcat" windscreen to shield your audio from even the strongest gusts of wind and a rubberized handle to ensure a firm grip. Professional run and gun audio made easy! The Movo BWS1000 Blimp is the perfect solution for protecting your audio from wind and vibrations while on the go.

Movo BWS1000 Blimp Microphone Windshield Mount and Vibration Protection System for Shotgun Microphones - Has 12-point Internal Shock Mount, Integrated XLR Cable, Deadcat Windscreen and Grip Handle #ad - . Our friendly US-Based support is here to help. The arrowheads on the cold shoe show the direction to mount additional accessories. Professional's must-have: features a blimp capsule, professional production, & "Deadcat" windscreen for noise reduction, perfect for field interviews, 12-point shock mount, and more.

More information about Movo #ad


Similar products



TILTA TA-BSP-15 15mm LWS Baseplate for BMPCC 4K Cage Blackmagic Pocket Cinema Camera 4K Rig Tilta Gray

#ad
Tilta #ad - Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, such as cage, cold shoe block, etc. The counter bore hole in the center is attachable to a 1/4'' screw, but the 1/4'' screw will not touch the hot shoe contact of accessories mounted on the cold shoe. There comes with two secure bending bevels on the one end to prevent accidental removal.

Weight: 0573 lbs color: tilta gray material: aluminum-alloy, stainless steel Rod System: 15mm LWS Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, handle and plate etc. This 15mm lws baseplate easily slides onto the base of the half and full camera cages.

TILTA TA-BSP-15 15mm LWS Baseplate for BMPCC 4K Cage Blackmagic Pocket Cinema Camera 4K Rig Tilta Gray #ad - Easy handling: has a rubberized grip handle and features 1/4" & 3/8" threads for boom pole or tripod attachment, perfect for run & gun audio capturing. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails.

Our friendly US-Based support is here to help. Noise free: its oversized zippered "deadcat" windscreen fits snugly over the blimp, further reducing wind and vibration noise by up to 40dB. This 15mm lws baseplate easily slides onto the base of the half and full camera cages.

More information about Tilta #ad


Similar products



Glide Gear TMP100 Adjustable iPad/ Tablet/ Smartphone Teleprompter Beam Splitter 70/30 Glass w/ Carry Case No Plastic All Metal / No Assembly Required

#ad
Glide Gear TMP100 #ad - Easy to set up and operate in a few simple steps. Designed to shoot with dslr/ mirrorless cameras. Noise free: its oversized zippered "deadcat" windscreen fits snugly over the blimp, further reducing wind and vibration noise by up to 40dB. Collapsible design makes for easy transport our teleprompter allows you to read scrolling text while looking directly into the camera.

Our friendly US-Based support is here to help. 10 feet reading range. The arrowheads on the cold shoe show the direction to mount additional accessories. Professional's must-have: features a blimp capsule, 12-point shock mount, perfect for field interviews, professional production, & "Deadcat" windscreen for noise reduction, and more.

Glide Gear TMP100 Adjustable iPad/ Tablet/ Smartphone Teleprompter Beam Splitter 70/30 Glass w/ Carry Case No Plastic All Metal / No Assembly Required #ad - Universal design: fits most shotgun microphones up to 15" 38cm long, Sennheiser MKH-416, including the Rode NTGs, Audio-Technica AT875R & More.1-year warranty: we've got your back! our products are designed to ease your technical woes, not add to them. Your camera will not photograph the text in the video.

We recommend using the App Teleprompter Premium/ Pro with your tablet or smartphone. Protective carry Case Included. Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, handle and plate etc.

More information about Glide Gear TMP100 #ad


Similar products



Neewer Black Metal Microphone Boompole Support Holder

#ad
Neewer Neewer #ad - The arrowheads on the cold shoe show the direction to mount additional accessories. Professional's must-have: features a blimp capsule, professional production, 12-point shock mount, & "Deadcat" windscreen for noise reduction, perfect for field interviews, and more. Universal design: fits most shotgun microphones up to 15" 38cm long, Sennheiser MKH-416, including the Rode NTGs, Audio-Technica AT875R & More.

1-year warranty: we've got your back! our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help. Use it, your work will be much easier. Noise free: its oversized zippered "deadcat" windscreen fits snugly over the blimp, further reducing wind and vibration noise by up to 40dB.

Neewer Black Metal Microphone Boompole Support Holder #ad - It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails. P>3-1/2" stainless steel shaft fits securely in your grip head. P>coated to protect your boompole. No clamping jaws to stress your boompole. This 15mm lws baseplate easily slides onto the base of the half and full camera cages.

Prompting use with android and IOS Teleprompter apps / Accommodates any smartphone or tablet up to 105 x 7.

More information about Neewer Neewer #ad


Similar products



Powerextra 2 Pack Replacement Sony NP-F970 Battery Compatible with Sony DCR-VX2100, DSR-PD150, DSR-PD170, FDR-AX1, HDR-AX2000, HDR-FX1, HDR-FX7, HDR-FX1000, HVL-LBPB, HVR-HD1000U, HVR-V1U, HVR-Z1P

#ad
Powerextra 4331902584 #ad - Compatible with the following sony handycam camcorders: - ccd-rv100 - ccd-rv200 - ccd-sc5 - ccd-sc5/e - ccd-sc55e - ccd-sc55 - ccd-sc6 - ccd-sc65 - ccd-sc7 - ccd-sc7/e - ccd-sc8/e - ccd-sc9 - ccd-tr1 - ccd-tr11 - ccd-tr1100e - ccd-tr12 - ccd-tr18 - ccd-tr18e - ccd-tr1e - ccd-tr2 - ccd-tr200 - ccd-tr205 - ccd-tr215 - ccd-tr2200e - ccd-tr2300 - ccd-tr2300e - ccd-tr280pk - ccd-tr290pk - ccd-tr3 - ccd-tr300 - ccd-tr3000 - ccd-tr3000e - ccd-tr3100e - ccd-tr311e - ccd-tr315 - ccd-tr315e - ccd-tr317 - ccd-tr3200e - ccd-tr3300 - ccd-tr3300e - ccd-tr411e - ccd-tr412e - ccd-tr413 - ccd-tr414 - ccd-tr415e - ccd-tr416 - ccd-tr417 - ccd-tr417e - ccd-tr425e - ccd-tr427 - ccd-tr427e - ccd-tr500 - ccd-tr511e - ccd-tr512e - ccd-tr515e - ccd-tr516 - ccd-tr516e - ccd-tr517 - ccd-tr555 - ccd-tr57 - ccd-tr610 - ccd-tr617 - ccd-tr617e - ccd-tr618 - ccd-tr618e - ccd-tr640e - ccd-tr67 - ccd-tr710 - ccd-tr713e - ccd-tr716 - ccd-tr717 - ccd-tr717e - ccd-tr718 - ccd-tr718e - ccd-tr728 - ccd-tr728e - ccd-tr730e - ccd-tr76 - ccd-tr760e - ccd-tr810e - ccd-tr818 - ccd-tr840e - ccd-tr845e - ccd-tr87 - ccd-tr910 - ccd-tr913e - ccd-tr917 - ccd-tr918 - ccd-tr918e - ccd-tr930 - ccd-tr940 - ccd-tr97 - ccd-trV15 - CCD-TRV16 Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2.

5 threaded holes, handle and plate etc. It has no memory effect or other negative effects in recharging. Ideal backup solution: you'll never miss a once-in-a-lifetime moment again by with a new backup package including 2 replacement batteries. P>extra-wide yoke permits easy positioning. No clamping jaws to stress your boompole.

Powerextra 2 Pack Replacement Sony NP-F970 Battery Compatible with Sony DCR-VX2100, DSR-PD150, DSR-PD170, FDR-AX1, HDR-AX2000, HDR-FX1, HDR-FX7, HDR-FX1000, HVL-LBPB, HVR-HD1000U, HVR-V1U, HVR-Z1P #ad - P>coated to protect your boompole.

More information about Powerextra 4331902584 #ad


Similar products



Wasabi Power LP-E6, LP-E6N Battery 2-Pack and Dual Charger for Canon EOS 5D Mark II/III/IV, EOS 5DS, 5DS R, EOS 6D, 6D Mark II, EOS 7D, 7D Mark II, EOS 60D, 60Da, 70D, 80D, EOS R, XC10, XC15

#ad
Wasabi Power KIT-BB-LPE6 #ad - Batteries replace: canon lp-e6, lc-e6e, lp-e6n charger replaces: Canon LC-E6, CBC-E6. P>3-1/2" stainless steel shaft fits securely in your grip head. P>fit on c-stands and Mic Stands. Protective carry Case Included. It has no memory effect or other negative effects in recharging. Ideal backup solution: you'll never miss a once-in-a-lifetime moment again by with a new backup package including 2 replacement batteries.

Includes 2 batteries and 1 dual USB charger for the Canon LP-E6 so you always have the power you need. Designed to shoot with dslr/ mirrorless cameras. The arrowheads on the cold shoe show the direction to mount additional accessories. Professional's must-have: features a blimp capsule, perfect for field interviews, 12-point shock mount, & "Deadcat" windscreen for noise reduction, professional production, and more.

Wasabi Power LP-E6, LP-E6N Battery 2-Pack and Dual Charger for Canon EOS 5D Mark II/III/IV, EOS 5DS, 5DS R, EOS 6D, 6D Mark II, EOS 7D, 7D Mark II, EOS 60D, 60Da, 70D, 80D, EOS R, XC10, XC15 #ad - Universal design: fits most shotgun microphones up to 15" 38cm long, Sennheiser MKH-416, including the Rode NTGs, Audio-Technica AT875R & More.1-year warranty: we've got your back! our products are designed to ease your technical woes, not add to them. 2v, 2600mah for longer run-time and battery life; batteries work with the Canon Original charger.

P>extra-wide yoke permits easy positioning. We recommend using the App Teleprompter Premium/ Pro with your tablet or smartphone.

More information about Wasabi Power KIT-BB-LPE6 #ad


Similar products



Neewer Pro 100% Metal Max Height 10ft/305cm Adjustable Reflector Stand with 4ft/120cm Holding Arm and 2 Pieces Grip Head for Photography Studio Video Reflector, Monolight and Other Equipment

#ad
Neewer Neewer #ad - The arrowheads on the cold shoe show the direction to mount additional accessories. Professional's must-have: features a blimp capsule, professional production, 12-point shock mount, & "Deadcat" windscreen for noise reduction, perfect for field interviews, and more. Universal design: fits most shotgun microphones up to 15" 38cm long, Sennheiser MKH-416, including the Rode NTGs, Audio-Technica AT875R & More.

1-year warranty: we've got your back! our products are designed to ease your technical woes, not add to them. Batteries include premium grade-a cells rated at 7. We recommend using the App Teleprompter Premium/ Pro with your tablet or smartphone. Industry standard beam split glass with 70/30 visible light transmission.

Neewer Pro 100% Metal Max Height 10ft/305cm Adjustable Reflector Stand with 4ft/120cm Holding Arm and 2 Pieces Grip Head for Photography Studio Video Reflector, Monolight and Other Equipment #ad - No assembly required / collapsible teleprompter for small footprint and easy transport / Tripod and Camera NOT included. P>coated to protect your boompole. Note: when you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halfs of the joint.

Note:stand only!the monolight is NOT included! Charger input: 5v, 2000ma; charger output: 8. So please hold the rear part of the arm to keep the arm balanced firstly before adjusting the angle. Its height is adjustable, satisfying your various shooting needs.

More information about Neewer Neewer #ad


Similar products



Tascam DR-60DMKII 4-Channel Portable Audio Recorder for DSLR

#ad
Tascam DR-60DMK2 #ad - Note:stand only!the monolight is NOT included! This 15mm lws baseplate easily slides onto the base of the half and full camera cages. Your camera will not photograph the text in the video. The multiple record modes include, 4-channel record, auto Record and TASCAMs Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.

For years, filmmakers have been trying different methods for recording audio - including the use of bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLRs. Note: when you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halfs of the joint.

Tascam DR-60DMKII 4-Channel Portable Audio Recorder for DSLR #ad - Batteries include premium grade-a cells rated at 7. No clamping jaws to stress your boompole. It has no memory effect or other negative effects in recharging. Ideal backup solution: you'll never miss a once-in-a-lifetime moment again by with a new backup package including 2 replacement batteries. Includes 2 batteries and 1 dual USB charger for the Canon LP-E6 so you always have the power you need.

Filmmakers have at their disposal two 1/4"-XLR Locking Combo MIC/LINE Inputs, 3. 5mm stereo mic input, camera out, Camera In, Line Out and Headphone Out.

More information about Tascam DR-60DMK2 #ad


Similar products



Powerextra 2 Pack Replacement Sony NP-F970 Battery and Smart LCD Display Dual USB Charger for Sony NP-F930 NP-F950 NP-F960 Battery and Sony CCD-SC55, TR516, TR716, TR818, TR910, TR917

#ad
Powerextra #ad - So please hold the rear part of the arm to keep the arm balanced firstly before adjusting the angle. Its height is adjustable, satisfying your various shooting needs. Easily attach to other equipment with its knob and spiral screw. Rubber padded, giving you a comfortable feeling and preventing it from sliding when you move.

Its sturdy 3 legs structure at the bottom ensures your equipments stable. Note: when you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halfs of the joint. Batteries include premium grade-a cells rated at 7.

Powerextra 2 Pack Replacement Sony NP-F970 Battery and Smart LCD Display Dual USB Charger for Sony NP-F930 NP-F950 NP-F960 Battery and Sony CCD-SC55, TR516, TR716, TR818, TR910, TR917 #ad - P>coated to protect your boompole. Note:stand only!the monolight is NOT included! Our friendly US-Based support is here to help. The upgraded hdda preamps provide up to 64dB of gain and some of the lowest noise levels available. Product details: replacement sony np-F970 Battery: Battery Capacity: 8800mAh Battery Voltage: 7.

4v battery type: li-ion condition: brand new high quality charger: Model: DS-F970 Input: Micro USB 5V 2A Output voltage: DC 8. 4v output current: 800ma compatible with the following sony handycam camcorders: sony ccd-rv100, ccd-trv15, ccd-tr930, ccd-tr1, ccd-tr710, ccd-tr617, ccd-sc5, ccd-tr427e, ccd-tr516, ccd-tr2, ccd-tr2200e, ccd-tr280pk, ccd-tr2300e, ccd-tr3200e, ccd-sc55e, ccd-tr728, ccd-tr411e, ccd-tr2300, ccd-tr917, ccd-tr417e, ccd-tr517, ccd-tr425e, ccd-tr427, ccd-tr315e, ccd-tr97, ccd-tr3300e, ccd-tr413, ccd-tr290pk, ccd-tr940, ccd-tr67, ccd-tr1100e, ccd-tr918, ccd-tr1e, ccd-tr515e, ccd-tr516e, ccd-tr910, ccd-tr317, ccd-tr728e, ccd-tr3000e, ccd-tr617e, ccd-tr3300, ccd-sc55, ccd-sc5/e, ccd-tr414, ccd-tr18, ccd-tr215, ccd-tr205, ccd-tr12, ccd-sc9, ccd-tr818, ccd-tr760e, ccd-rv200, ccd-tr845e, ccd-tr730e, ccd-tr412e, ccd-tr511e, ccd-tr76, ccd-sc8/e, ccd-tr512e, ccd-tr200, ccd-tr311e, ccd-tr417, ccd-tr87, ccd-tr315, ccd-tr3, ccd-sc7/e, ccd-tr415e, ccd-tr3100e, ccd-tr610, ccd-tr618e, ccd-tr717, ccd-tr718, ccd-tr716, ccd-tr810e, ccd-sc65, ccd-tr416, ccd-tr3000, ccd-tr913e, ccd-tr717e, ccd-sc6, ccd-tr618, ccd-tr918e, ccd-tr11, ccd-tr840e, ccd-tr300, ccd-tr640e, ccd-tr18e, ccd-tr500, ccd-tr718e, ccd-sc7, ccd-tr57, ccd-tr713e, ccd-tr555, ccd-trv16 package includes: 2 x replacement Sony NP-F970 battery 1 x Smart LCD Display Dual Charger 1 x 1M Mirco USB Cable 1 x Microfiber Cleaning Cloth Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2.

More information about Powerextra #ad


Similar products